Iwatsu ADIX - Speed Dial and Message Features; Speed Dialing from Touch-Tone Phone; Speed Dialing from Rotary Phone; Leaving a Message Waiting

Universal Night Answer
If you need to pick up an incoming call when
the system is in the night mode:
þ
Lift the receiver
þ
Dial the Universal Night Answer code [546]
You will be connected to the incoming call
Note: In some cases, available features and feature operation
may differ from those listed in this guide, depending on the
hardware, software, and programmed functions in your ADIX
system. For more information, contact your authorized
Iwatsu distributor.
within a speed dial number dial * and the
desired pause time in seconds (1-9).
To Register a [*]: When registering the
telephone number, at the place where you want
to insert a [*], dial **
* This code is programmed by your system administrator
To Speed Dial A Number
From A Touch Tone Phone
þ
Lift the receiver
þ
Press *, then dial the Speed Dial Code for
the number you want to call
þ
The system automatically dials the registered
number
From A Rotary Dial Phone
þ
Lift the receiver
þ
Dial the Speed Dial Access code
þ
Dial the Speed Dial Code for the number that
you want to call
þ
The system automatically dials the registered
number
Message Waiting
To Leave A Message
When the extension you are calling is busy or
does not answer:
þ
Do not hang up
þ
Quickly press and release the receiver button
þ
Dial the Message code
þ
When you hear the confirmation tone hang
up
If the extension you called is an ADIX digital
telephone, the lamp on the message button
[MSG] will light. If it is a single line telephone
with a message lamp, the message lamp on the
phone will flash.
To Cancel Message Waiting
If you want to cancel a message you left at an
extension:
þ
Lift the receiver
þ
Dial the Cancel code and the Message
code
þ
Dial the extension number
þ
When you hear the confirmation tone hang
up
The Message button [MSG] lamp at the
extension will be extinguished.