Cloud enable your machines
13
Operation
Configure the IXrouter3
To configure your IXrouter3, log in to your IXplatform account and navigate to the [Tools]
page. Here you can generate an IXrouter configuration file by following a few simple steps.
You can then download the configuration file, which must be copied onto a USB flash
drive. After supplying power to the IXrouter, insert this USB flash drive in the USB port. The
IXrouter3 will register itself to IXON’s IXplatform and set up a secure VPN connection. You
can further configure the IXrouter via the IXplatform (https://connect.ixon.cloud).
For a more extensive manual we recommend viewing our online step-by-step
guides: https://support.ixon.cloud/hc/sections/360000257812.
To Next Page
Loading...
