J.P. Instruments EDM-900 User Manual

Page 4 Engine Data Management
Product Features
 Hands-free, automatic scanning
 Lean Find finds the first and last cylinder to peak with
true peak detect—eliminates false peaks
 Displays both leaned temperature below peak and peak
 Battery voltage with alarm
 Amperes (load or charge/discharge meter)
 Programmable alarm limits
 Exhaust Gas Temperatures (EGTs) to stable 1°F
resolution
 DIF low to high EGT with alarm
 Shock cooling monitored on every cylinder
 Fast response probes
 Non-volatile long term memory
 Records and stores data up to 30 hours
 Post-flight data retrieval
 Data retrieval software
 Oil pressure
 Oil temperature
 Turbine inlet temperature, if applicable (optional)
 Outside air temperature
 Compressor discharge temperature (optional)
 Carburetor temperature or induction temperature
(optional)
 Fuel pressure, if applicable
 Fuel level Voltage, Resistive or Capacitive (frequency)
 Fuel Flow
 Solid-state rotor fuel flow transducer
 Fuel quantity in gallons, kilograms, liters, or
pounds
 Low fuel quantity alarm
 Low fuel time alarm
 GPS interface
 Instantaneous fuel flow rate
 Total amount of fuel consumed
 Total fuel remaining
 Time to empty at the current fuel flow rate
 RPM and manifold pressure
 Automatically calculates percent horsepower
 Hobbs® timer
 Remote Auxiliary Display (RAD)

J.P. Instruments EDM-900 Specifications

General

Brand	J.P. Instruments
Model	EDM-900
Category	Control Panel
Language	English