J.P. SELECTA AUTESTER ST DRY PV-B print 18L User Manual

MANUAL DE INSTRUCCIONES CODIGO 80416 REV D 12/2023 Pag.: 35
J.P. SELECTA s.a.u. Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España Tel 34 937 700 877 Fax 34 937 702 362
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
Front View
Name Description
1. Water Filling Port Manually lling water
2. Drainage Port Connected to used water tank
3. Water Filling Port Automatically lling water
4. Drainage Port Connected to main water tank
5. Internal Printer Internal printer to print sterilization record after nished cycle.
6. Power Supply Switch Standard green power switch
7. Displaying Window It will show temperature, pressure or other sterilization information on the
window, easy for you to operate during the working.
8. Door Handle Door handle with safe door locker to open and close the door.
Rear View
Name Description
9. Fuse Protect product when the power is not stable.
10. Power socket Connected with power source
11. Vent area Output heat from this vent area by condenser
12. Printer out port Connect a mini printer and output sterilization record
13. Relief Valve Leak pressure automatically when over working pressure
14. Nameplate Basic information of manufacturer
Open view
Name Description
15. Air Filter Filter the air and ensure air into chamber is clean
16. Door Gasket For sealing the door
17. Tray Frame To load the articles
1
2
8
7
6
5
43
17
16
15
9
10
14
1312
11

J.P. SELECTA AUTESTER ST DRY PV-B print 18L Specifications

General

Brand	J.P. SELECTA
Model	AUTESTER ST DRY PV-B print 18L
Category	Laboratory Equipment
Language	English