J.P. SELECTA AUTESTER ST DRY PV-B print 18L User Manual

INSTRUCTION MANUAL CODE 80416 REV D 12/2023 Page: 42
J.P. SELECTA s.a.u. Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España Tel 34 937 700 877 Fax 34 937 702 362
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
Force end of program
In the cycle, if the program is interrupted by the error or pressing Start/Stop button (5) more than 3 seconds it will enter
“Abnormal Exiting program” as followed window:
In this state the air release solenoid valve will be opened and exhaust air. You have to cancel this information by pressing
Start/Stop button (5), and then back to normal state window.
WARNING: Do not try to open the door when the pressure value is higher than 0.1 bar.
Steam Sterilizer Operation Manual
No. ASS0010
REV-D
Page 35 of 48
6.10 Abnormal Exiting
In the cycle, if the program is interrupted by the error or press button more than 3 seconds
it will enter “Abnormal Exiting program” as followed window:’
WARNING
Abnormally exit
0.73bar 108.6℃
In this state the air release solenoid valve will be opened and exhaust air. You have to cancel
this information by press
button, and then to back normal state window.
WARNING: Do not try to open the door when the pressure value is higher than 0.1 bar.
TIME
PRINTER
LANGUAGE
WATER QUALITY
6.4 Conguration
• Turn on the main switch.
• Press the UP key (2) to access the congurable parameters (Time, Printer, Language
and Water Quality).
• Select the option to modify with keys (2) and (3).
• Press Start/Stop key (5) to access the submenu or choose the desired option.
6.4.1. Set time
Press UP or DOWN button to increase or decrease values, then press PROG button to change items, and the press START/STOP
to save and exit.
6.4.2. Set printer
Press UP or DOWN button to turn ON or OFF the printer, choose ALL to print the date which record the value in each 30 secs.
OFF - neither the printer nor the USB works
ON - the printer and USB works
ALL - is factory only
Steam Sterilizer Operation Manual
No. ASS0010
REV-D
Page 24 of 48
5.2.2 Setting
In the Choosing menu to press
button to enter Setting program
Press
or button to change the items, press
to enter sub-menu.
5.2.2.1:Time Setting
Press
or button to increase or decrease values , then to press
to change items,
press
to save and exit.
5.2.2.2: Printer Setting
Press or button to turn ON or OFF the printer, choose ALL to printer the date which record
the value in each 30secs
PRINTER
ALL / ON / OFF
D / M / Y
12 05 2012
H ： M ： S
11 02 20
TIME SET
PRINTER
LANGUAGE
PROGRAM
SET UP
Steam Sterilizer Operation Manual
No. ASS0010
REV-D
Page 24 of 48
5.2.2 Setting
In the Choosing menu to press
button to enter Setting program
Press
or button to change the items, press
to enter sub-menu.
5.2.2.1:Time Setting
Press
or button to increase or decrease values , then to press
to change items,
press
to save and exit.
5.2.2.2: Printer Setting
Press or button to turn ON or OFF the printer, choose ALL to printer the date which record
the value in each 30secs
PRINTER
ALL / ON / OFF
D / M / Y
12 05 2012
H ： M ： S
11 02 20
TIME SET
PRINTER
LANGUAGE
PROGRAM
SET UP

J.P. SELECTA AUTESTER ST DRY PV-B print 18L Specifications

General

Brand	J.P. SELECTA
Model	AUTESTER ST DRY PV-B print 18L
Category	Laboratory Equipment
Language	English