MANUAL DE INSTRUCCIONES CODIGO 80416 REV D 12/2023 Pag.: 43
J.P. SELECTA s.a.u. Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España Tel 34 937 700 877 Fax 34 937 702 362
e-mail: selecta@jpselecta.es - website: http://www.grupo-selecta.com
Sterilization temperature 121°C 134°C
Sterilization time 15 to 50 minutes 4 to 40 minutes
Drying time 1 to 30 minutes 1 to 30 minutes
Vacuum number 0, 1 or 3 0, 1 or 3
6.4.3 Set language
Press UP or DOWN button to choose language, and then press START/STOP to save and exit.
6.4.4
Program 11 USER settings
Program No. 11 “User-dened” is used to achieve a perfect sterilization by adjusting to a special setting. The process of the “User-
dened” program is as follows:
- Press the PROG key (4) to enter program 11, then press PROG key (4) again to select the value you wish to modify: sterilization
temperature, sterilization time, drying time and number of vacuums.
- Press the UP (2) or DOWN (3) keys to change the value of each parameter.
- Press the START key (5) to conrm and START (5) again to start the cycle.
Steam Sterilizer Operation Manual
5.2.2.3: Language Setting
Press or button to choose language, and then press
to save and exit.
5.2.3 Special Sterilization Setting
Program No. 11 “User-defined” is used for setting up the special data in order to get
perfect sterilization effect. “User-defined” program operation process.
Press
to enter the “User-defined” program, then press
to switch items:
sterilization temperature, sterilization time, drying time, times of vacuum
Press or button to set value of each item.
Press
button to confirm, press again to start the cycle.
134℃ 4min
03min 3time
SELECT
11 User-defined
134℃ 4min
03min 3time
SELECT
CAUTION when removing the material from the autoclave.
Risk of burns due to contact with hot surfaces.
The material inside the autoclave could be at a temperature higher than 100ºC.
Use the handle provided for trays handling.
To Next Page
Loading...
Need help?
General
