jablotron 100+ - Default Chapter; Table of Contents

EN
23
TABLE OF CONTENTS
1. INTRODUCTION 24
2. OPERATING THE JABLOTRON 100
+
SYSTEM
25
2.1. ON-SITE OPERATING 27
2.1.1. USING THE SYSTEM KEYPAD 27
2.1.2. KEYPAD CODE AUTHORIZATION 29
2.1.2.1. ALARM SETTING 31
2.1.2.2. ALARM UNSETTING 31
2.1.2.3. DURESS ACCESS CONTROL 32
2.1.2.4. PARTIAL ALARM SETTING 32
2.1.2.5. TERMINATING A TRIGGERED
ALARM
32
2.1.2.6. SECTION CONTROL FROM THE
MENU OF THE KEYPAD WITH
AN LCD DISPLAY
33
2.1.3. USING THE JA-110E AND JA-150E
SYSTEM KEYPADS
33
2.1.3.1. ALARM SETTING 35
2.1.3.2. ALARM UNSETTING 36
2.1.3.3. PARTIAL ALARM SETTING 36
2.1.3.4. DURESS ACCESS CONTROL 37
2.1.3.5. TERMINATING A TRIGGERED
ALARM
37
2.1.4. OPERATING THE SYSTEM WITH
A KEYFOB
38
2.2. REMOTE OPERATING 38
2.2.1. OPERATING THE SYSTEM USING
THE MyJABLOTRON SMARTPHONE
APP
39
2.2.2. OPERATING THE SYSTEM VIA THE
MyJABLOTRON WEB INTERFACE
39
2.2.3. OPERATING THE SYSTEM USING
THE VOICE MENU
39
2.2.4. OPERATING THE SYSTEM USING
SMS COMMANDS
39
2.2.5. OPERATING THE SYSTEM REMOTELY
USING A COMPUTER (J-LINK)
39
2.2.6. CONTROLLING THE PROGRAMMABLE
OUTPUTS (PG)
39
2.2.6.1. KEYPAD SEGMENT 39
2.2.6.2. USER KEYPAD AUTHORIZATION 40
2.2.6.3. FROM THE MENU OF THE KEYPAD
WITH AN LCD DISPLAY
40
2.2.6.4. REMOTE CONTROL 40
2.2.6.5. MyJABLOTRON SMARTPHONE APP 40
2.2.6.6. MyJABLOTRON WEB INTERFACE 40
2.2.6.7. DIALLING-IN 40
2.2.6.8. SMS MESSAGE 40
3. BLOCKING/DISABLING IN THE
SYSTEM
41
3.1. BLOCKING USERS 41
3.2. BLOCKING DETECTORS 41
3.3. DISABLING TIMERS 41
4. CUSTOMIZING THE SYSTEM 41
4.1. CHANGING A USER ACCESS CODE 41
4.2. CHANGING, DELETING OR ADDING
AN RFID CARD/TAG
42
4.3. CHANGING A USERNAME
OR PHONE NUMBER
42
4.4. ADDING/DELETING A USER 42
4.5. CALENDAR EVENTS SET UP
5. EVENT HISTORY 42
5.1. USING THE LCD KEYPAD 43
5.2. USING THE J-LINK SOFTWARE AND
A COMPUTER
43
5.3. LOGGING INTO MyJABLOTRON
(WEB/SMARTPHONE)
43
6. TECHNICAL SPECIFICATIONS 43
MMD59501