Jabra Noise Guide User Manual

11
JABRA NOISE GUIDE – MANUAL RETURN TO “ TABLE OF CONTENTS”
There are 2 ways of saving your configurations:
1. Connect the device directly to your PC while performing the configuration.
2. Uploading your configuration to the USB-key.
1. DIRECT CONFIGURATION:
Connect the device directly to your PC. Click ”Configure” every time you have changed settings.
This way, your settings will be saved directly on the device.
2. EXPORT SETUP TO USB:
Exporting the configuration to the USB-key is useful if you need to apply the same settings to multiple
devices.
1. Insert the included USB-key.
2. Choose your settings.
3. Click “Export Setup to USB”.
4. Save your settings to the USB-key and click ”OK”.
5. The pop-up window confirms that you have saved
your configuration successfully.
6. Connect the device to a power source and insert the USB-key. The Ear symbol will light green for approx.
5 seconds to indicate that your configuration has been exported successfully.
CONFIGURATION

Jabra Noise Guide Specifications

General

Brand	Jabra
Model	Noise Guide
Category	Measuring Instruments
Language	English