25
JABRA NOISE GUIDE – MANUAL RETURN TO “ TABLE OF CONTENTS”
NAVIGATING IN THE SOFTWARE
MEASUREMENT LIBRARY
Jabra Noise Guide automatically saves all live measurements to the C-drive in the folder called ”Noise
Guide data”. Data imported from the Jabra Noise Guide via USB are also saved in this folder. All files are
saved in a CSV format that is compatible with Excel.
Log files will be named “PC” if they are live measuements, and “Internal” if they are exported from the
Jabra Noise Guide’s internal memory.
The log file names are created as follows: 1. Name of device
2. Date
3. Origin of the data (live measurement or imported via USB)
Example of a live measurement:
• Strandboulevarden-11-03-2015-PC
Example of an imported measurement:
• Strandboulevarden-09-03-2015-internal
If you wish to rename or edit your log files, this must be done
from the destination folder on the C-drive. Take a short-cut to the
destination folder by clicking ”Open in Explorer” in the bottom
right corner.
Select “Noise Guide data” to update the folder in the software.
To Next Page
Loading...
