Jabra Noise Guide User Manual

17
JABRA NOISE GUIDE – MANUAL RETURN TO “ TABLE OF CONTENTS”
RED EAR SETTING
By default, the red Ear-symbol will be lit for 1
second when the noise limit is exceeded. Under
”Light Settings” you can change the duration and
type of alarm:
• Lit 1 sec.
• Lit 2 sec.
• Flashing 1 sec.
• Flashing 2 sec.
LEQ 15 60
By default, the light panel at the bottom of the
device will indicate the average noise level over
the past 15 minutes.
‘In “Light Settings” you can set the light panel to
show the average noise level for the past 15 or 60
minutes’
LIGHT OFF
In ”Light Settings” you have the option of
switching off the light alarm for a certain dura-
tion of time.
• Check the box ”Light off”.
• Select a time period for the lights
to be switched off.
Please note! The internal memory will continue to
log data disregarded that the lights are swithced off.
PLEASE NOTE! If your Jabra Noise Guide is connected directly to your PC, remember to save your settings
by clicking on ”Configure”. Click ”Export to USB” if you are performing an offline configuration.
SETUP

Jabra Noise Guide Specifications

General

Brand	Jabra
Model	Noise Guide
Category	Measuring Instruments
Language	English