CONTROLS 4
en-21
4.2.6.7 TASKBAR POP-UP MENU__________________________________________________
When the first screen is shown on the display, press any of the selection
buttons to display the Taskbar Pop-Up Menu. If the reversing fan option is
installed, press the LEFT or RIGHT arrow keys to toggle to the second
screen.
To activate cruise control, drive the mower in the forward direction, press any
of the selection buttons to display the taskbar pop-up menu, press the first
selection button from the left and lift your foot off the pedal. The cruise control
icon will change to blue and the mower will continue to drive at the current
speed until cruise control is selected again, the traction pedal is pressed, the
brake switch is moved to the ON position, the operator leaves the seat or the
key switch is turned to the OFF position.
To engage 4WD, press any of the selection buttons to display the Taskbar
Pop-Up Menu and press and hold the second button from the left. 4WD will be
active as long as the button is held down and the mower is driven in the
forward direction. When the button is released, the mower will return to 2WD.
To change throttle mode, press any of the selection buttons to display the
Taskbar Pop-Up Menu and press the third button from the left. The throttle
mode icon on the display will cycle to the next mode. Repeat pushing the
throttle mode button until the desired traction mode is selected. Throttle mode
can also be changed using the vehicle settings menu. See “Throttle Mode”
on page 25.
To activate the weight transfer system, press any of the selection buttons to
display the Taskbar Pop-Up Menu and press and hold the fourth button from
the left. The mower controller will pulse the lift system to transfer the weight
from the cutting implements to the drive wheels to increase traction for as long
as the button is held down. When the button is released, the mower will return
to normal operation.
If the reversing fan option is installed, press the LEFT or RIGHT arrow
keys to toggle to the second screen and press the first selection button from
the left. The fan will complete a reverse fan cycle then return to normal
operation.
TST
™
12:00:00 1/1/2016
0.0 Hours
Selection
Buttons
Selection
Buttons
Cruise
Control
Throttle
Mode
Weight
Transfer
4WD
Fan
Reverse
To Next Page
Loading...
