4 CONTROLS
en-26
4.2.6.16 ENTER PIN_____________________________________________________________
Start the engine. Navigate to the Vehicle Settings Menu.
Use the UP and DOWN arrow keys until the green arrow is
next to PIN. Press the select button to select PIN.
Use the arrow keys to highlight the correct number. Press the select button
to enter the number and to advance to the next position. Repeat until all four
numbers of the pin have been entered.
Highlight the C and press the select button to clear the previous number.
If the correct PIN number has been entered the PIN menu will be on the
display.
The initial PIN number is 1001
Notice: Managers are advised to change the PIN to stop the machine
parameters being changed.
1001
123
456C
7890
Enter Pin
Mode
Measurement Settings
Pin
Vehicle Settings Menu
One Touch
AWD in Mow
Vehicle Speed
Change PIN
Inclinometer
Set Default Parameters
Fan Drive
PIN Menu
To Next Page
Loading...
Need help?
General
