CONTROLS 4
en-29
4.2.6.19 TIME UNTIL SERVICE ____________________________________________________
Navigate to the Service Menu.
Use the UP and DOWN arrow keys until the green arrow is
next to Time Until Service. Press the select button to select Time Until
Service.
Press the back button to return to previous menu.
To reset the service hours, access the Pin Menu and select Reset Service
Hours.
4.2.6.20 VEHICLE STATUS _______________________________________________________
Start the engine. Navigate to the
Service Menu.
Use the UP and DOWN
arrow keys until the green
arrow is next to Vehicle Status.
Press the select button to select
Vehicle Status.
The first screen of the vehicle status
shows the software revisions of the
MCU controller and display.
The second screen of the vehicle
status shows the engine speed,
engine throttle position, traction pedal
position and vehicle speed.
The third screen of the vehicle status
shows the battery voltage and the
engine coolant temperature.
Press the back button to return to
previous menu.
Time Until Service
23 Hours
Engine Hours: 202
Cutter Hours: 151
Fault Log
Time Until Service
Vehicle Status
I/O Diagnostics
Inhibit Regen
Parked Regen
Service Menu
Engine Speed
2000
Pedal Position Engine Throttle
2.5 65
Pg 1 of 3
Volts
RPM
%
Battery Voltage
12.4
Engine Coolant Temperature
141.3
Pg 2 of 3
Volts
°F
Fault Log
Time Until Service
Vehicle Status
I/O Diagnostics
Inhibit Regen
Parked Regen
Service Menu
Controller Software Revision:
011991$A
Display Software Revision:
012001$A
Pg 3 of 3
Vehicle Status
To Next Page
Loading...
Need help?
General
