EasyManuals Logo

Jacobsen AR Series User Manual

Jacobsen AR Series
106 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
4 CONTROLS
en-34
4.2.6.29 PARKED REGEN ________________________________________________________
When a parked regen is required, the parked regen icon will be active on the
display.Start the engine. Navigate to the Service Menu.
Use the UP and DOWN arrow keys until the green arrow is
next to Parked Regen. Press the select button to select Parked Regen.
On the confirmation screen, press the select button to accept and enter
Parked Regen
To start a parked regen, the parking brake switch must be in the ON position,
the mow switch must be in the OFF position and the engine temperature must
be above 150° F (65° C). If these conditions are not met, a screen will appear
indicating the requirements.
When the requirements are met, the mower will enter the parked regen state.
The length of time that the Parked Regen will take depends on the level of
particulate matter in the DPF. During the Parked Regen, the Regen Request
icon will be active. When high-exhaust temperatures are sensed during
Parked Regen, the High-Exhaust Temperature icon will also be active. Do not
disengage the parking brake, stop the engine or move the mower during the
Parked Regen.
WARNING
During Active or Parked Regen, the temperature of the exhaust
components can be more than 1150° F (625° C). To prevent burns, do not
touch a hot exhaust system and do not stand or reach into exhaust gas
area from exhaust pipe outlet. To prevent fires, make sure the engine area
is kept clean and the grass clippings are not near exhaust components.
Make sure the exhaust gas from the exhaust pipe is not blocked and there
is enough space between the exhaust pipe and objects. Park the mower on
concrete or gravel during Parked Regen. During Active or Parked Regen
exhaust gas from the exhaust pipe can cause turf damage or fire.
Confirm to activate Parked Regeneration
Parked Regeneration
Fault Log
Time Until Service
Vehicle Status
I/O Diagnostics
Inhibit Regen
Parked Regen
Service Menu
>
150° F
Parked Regeneration
Parked Regeneration has been activated
Parked Regeneration
!

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jacobsen AR Series and is the answer not in the manual?

Jacobsen AR Series Specifications

General IconGeneral
Deck MaterialSteel
EngineDiesel
DriveHydraulic
Number of Reels5
Fuel TypeDiesel
TransmissionHydraulic

Related product manuals