GB-7
GB
JACOBSEN FAIRWAY 250 Series DH
SAFETY AND OPERATORS MANUAL
4.6 RECOMMENDED LUBRICANTS
Engine oil: Should be to MIL-L-2104C or to
A.P.I. Classification SE/SF/SG
grades. [10W-30]
Hydraulic Oil: To A.P.I. Classification CE/SF
grades
SAE 10W-30
Grease: Shell Darina R2, or equivilant.
4.7 CUTTING PERFORMANCE
46 cuts per meter at 12 km/hr with 7-knife cutting
head units.
72 cuts per meter at 12 km/hr with 11-knife cutting
head units.
4.8 CUTTING PERFORMANCE (AREA)
2.7 hectares/hr. at 12 km/hr. ( 6.67 acres/hr at 7.5
mph)
10% allowance is included for normal overlaps and
turning at the end of each cut.