QUALITY OF CUT 5
23
5.4 SCALPING _______________________________________________________________
NOTE: Arrow indicates direction of travel.
Scalping is a condition in which areas of grass are cut
noticeably shorter than the surrounding areas, resulting in
a light green or even brown patch. This is usually caused
by an excessively low height-of-cut setting and/or uneven
turf.
Probable Cause Remedy
HOC (height-of-cut) settings are lower than normal. Check and adjust the HOC settings. (Refer to Parts & Maintenance
Manual.)
Turf too uneven for the mower to follow. Change mowing direction or raise HOC setting.
To Next Page
Loading...
