EasyManuals Logo

Jacobsen R-311T User Manual

Jacobsen R-311T
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
QUALITY OF CUT 5
en-25
5 QUALITY OF CUT
5.1 QUALITY OF CUT TROUBLESHOOTING _______________________________________
It is recommended that a “test cut” be performed to evaluate
the mower’s performance before beginning repairs.
An area should be available where “test cuts” can be made.
This area should provide known and consistent turf
conditions to allow accurate evaluation of the mower’s
performance.
Another “test cut” should be performed after the completion
of the repairs and/or adjustments to verify the mower’s
performance.
Before performing a “test cut” to diagnose cut appearance
and mower performance, the following items should be
verified to ensure an accurate “test cut.”
1. Mowing (Ground) Speed
2. Blade Sharpness
3. Height-of-Cut (HOC)
4. Decks Leveled
5. Blade Speed
6. Deck Rake not Set
5.2 WASHBOARDING__________________________________________________________
NOTE: Arrow indicates direction of travel.
Washboarding is a cyclical pattern of varying cutting
heights, resulting in a wave-like cut appearance.
This condition is usually caused by the weight transfer not
set correctly.
Washboarding may also be caused by variations in the turf.
Probable Cause Remedy
Decks have too much or too little weight on them. Adjust weight transfer valve to put more weight on decks.
(Refer to Parts & Maintenance Manual.)
TN0159

Other manuals for Jacobsen R-311T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jacobsen R-311T and is the answer not in the manual?

Jacobsen R-311T Specifications

General IconGeneral
BrandJacobsen
ModelR-311T
CategoryLawn Mower
LanguageEnglish

Related product manuals