QUALITY OF CUT 5
en-29
5.6 STREAKS ________________________________________________________________
NOTE: Arrow indicates direction of travel.
A streak is a line of uncut grass. This is usually caused by a
damaged blade.
Probable Cause Remedy
Damaged blade(s). Replace blade(s).
Turning too aggressively. Cutting units don’t overlap during turns or
on side hills.
Turn less aggressively to allow cutting units to overlap. Change
mowing direction or pattern on side hills.
Tire mats down grass before it is cut. Install high lift blades.
Blades installed incorrectly. Check for proper clockwise/counter-clockwise blade installation.
To Next Page
Loading...
Need help?
General
