WARNING
Connecting Jumper Cables:
1. Connect positive cable to positive
remote terminal first.
2. Connect negative cable to negative
remote terminal last.
Disconnecting Jumper cables:
1. Remove negative cable first.
2. Remove positive cable last.
WARNING
Use caution when connecting and
disconnecting jumper cables.
Battery explosion may result if
remote terminals are shorted.
Danger
To avoid injury when working with battery:
1. Always connect the black (-) ground last and remove it
first.
2. Keep sparks and flames away, and avoid contact with
acid.
To avoid injury when jumping battery:
1. Connect positive (+) terminal to positive (+) terminal.
2. Connect negative (-) terminal on good battery to frame of
vehicle that has dead battery.
To Next Page
Loading...
Need help?
General
