en-19
SPECIFICATION 4
4.7 RECOMMENDED LUBRICANTS
Engine oil:Should be to MIL-L-2104C or to A.P.I.
Classification CD grades. [10W-
30]
Grease:
For rear axle:K NATE (RJL No. 4213860), or
equivalent to MIL-G-23549C,
MIL-G-2345C, DIN 51 825, DIN
51 818.
General: Lithium based general purpose grease.
4.8 CUTTING PERFORMANCE (AREA)
1.58 hectares/hr. at 9.6 km/hr. ( 3.9 acres/hr at 6.0
mph)
10% allowance is included for normal overlaps and
turning at the end of each cut.
Cutting Frequency
(7-blade) 7.4 mm/1,6 Km/h
TEMPERATURE VISCOSITYI
ABOVE 25°C (77°F) SAE30 or
SAE10W-30
SAE10W-40
0°C to 25°C (32°F to 77°F) SAE20 or
SAE10W-30
SAE10W-40
BELOW 0°C (32°F) SAE10W or
SAE10W-30
SAE10W-40
To Next Page
Loading...
