To Next PageTo Next Page
Need help?Do you have a question about the Jacobsen TR3 and is the answer not in the manual?
General| Brand | Jacobsen |
|---|---|
| Model | TR3 |
| Category | Lawn Mower |
| Language | English |
Key information regarding proper operation and maintenance of the machine for optimal service.
Details on identifying machine model, serial number, and specifications via the serial plate.
Instructions for safe and environmentally responsible disposal of machine parts and fluids.
General rules and warnings for safe operation of the machine.
Importance of maintaining legible safety labels and obtaining replacements.
Procedures and precautions for safely starting the engine and driving the machine.
Guidelines for safe transport and parking, including leaving the driving position.
Specific warnings and procedures for operating the machine on slopes.
Safety measures related to blocked cutting units and general maintenance.
Technical details of the Kubota diesel engine used in the machine.
General technical specifications of the Jacobsen TR3 machine.
Key physical dimensions, weight, and ground pressure of the machine.
Measured hand/arm and whole body vibration levels according to directives.
Detailed specifications for different cutting unit models.
Table detailing recommended oils, greases, and their viscosities.
Declarations of conformity and technical standards met by the machine.
Identification and meaning of European safety warning labels found on the machine.
Identification and meaning of European instruction labels for controls and functions.
Identification and meaning of US safety warning labels, including DANGER and WARNING.
Identification and meaning of US instruction labels for operation and controls.
Identifies all switches, lamps, and gauges on the operator's control panel.
Operation of the starter key, parking brake, and working light switches.
How to engage cutting units and adjust weight transfer for traction.
Explanation of various warning lamps indicating potential issues with engine or systems.
Controls for engine speed, unit lift/lower, and display of operational data.
Operation of traction pedals, steering tilt, and auxiliary power outlets.
Procedures for releasing parking brake and engaging transport latches.
Essential checks to perform before operating the machine daily.
How the safety interlock system prevents unauthorized operation and ensures safety.
Step-by-step guide for safe and effective operation of the mower.
Instructions for correctly attaching cutting units to the machine.
Procedures for starting and stopping the engine under various conditions.
Specific safety precautions and techniques for mowing on inclines.
Overview of regular maintenance tasks and their recommended intervals.
Table specifying types and quantities of fluids needed for maintenance.
Lubrication points and intervals for different cutting unit models.
Procedures for checking/changing engine oil and oil filter.
Checks and procedures for engine coolant level and fan belt tension.
Procedures for checking hydraulic oil level, filter, and test ports.
Steps for bleeding air from the fuel system and changing the fuel filter.
Maintenance for the air cleaner and battery, including cleaning and safety.
General service checks, freewheel control, and proper machine storage procedures.
Steps to adjust the traction pedal to prevent unwanted wheel creep.
Adjusting weight transfer bias for improved slope performance or reduced unit bounce.
Setting the correct cutting height by adjusting front and rear rolls.
Procedures for aligning the reel and bedknife for optimal cutting performance.
Switching between cutting modes and setting cutting height ranges.
Information on factory-set transport and mow speeds.
Comprehensive guide to adjusting operator seats, including weight, fore/aft, and backrest.
Procedure for using the backlapping kit to maintain cutting reels.
Information on the OPS frame and mandatory seat belt usage.
Availability of grass box kits for different cutting unit models.
Common problems and solutions for engine not starting or running poorly.
Diagnosing and resolving issues affecting the quality of the grass cut.
Schematic showing the hydraulic system components and flow.
Wiring diagram for instrument cluster and related components.
Overall electrical wiring schematic of the machine.
Location and identification of fuses and relays within the control panel and engine compartment.
Table of recommended torque values for metric and UNC/UNF threads.
Details on warranty coverage, terms, and conditions for the machine.
Information on obtaining service, spares, and contacting authorized dealers.
