8 MAINTENANCE AND LUBRICATION CHARTS
en-33
8Maintenance and Lubrication Charts
8.1 MAINTENANCE CHART ____________________________________________________
1
Perform more frequently under severe, dusty, dirty conditions.
2
Have a Kawasaki authorized dealer perform this service
Mower Service Interval Chart
Interval Item Section
First 8 Hours • Replace engine oil
• Replace engine oil filter
• Check electrical wiring
• Lubricate spindles and casters
See 9.3
See 9.3
See 9.18
See 8.2
Each day (10 Hours) • Check Safety Interlock System
• Check engine oil level
• Clean engine oil cooler
• Check hydraulic oil level
• Clean area around muffler and controls
See 7.2
See 9.3
Each week (50 Hours) • Check fuel lines and fittings
• Inspect parking brake and steering control lever linkage
• Inspect deck and drive belts
• Check for loose components
• Lubricate grease fittings
See 9.6
See 8.2
First 75 Hours • Replace drive axle fluid and filter (Two per mower) See 9.9
Each Two weeks (100
Hours)
• Clean engine oil cooler fins and cylinder cooling fins
1
• Check and clean primary air filter element
1
• Check engine exhaust system
• Replace engine oil and filter
1
• Replace EFI fuel filter (Kohler Engine)
1
• Clean and regap spark plugs (Kawasaki Engine)
See 9.15
See 9.4
See 9.9
See 9.3
Each month (250 Hours) • Check electrical wiring
• Replace primary air filter element
1
• Check secondary air filter element
1
See 9.18
300 Hours
• Clean combustion chamber (Kawasaki Engine)
2
• Check and adjust valve clearance (Kawasaki Engine)
2
• Clean and lap valve seating surface (Kawasaki Engine)
2
Each two months (400
Hours
• Replace fuel filter
• Replace drive axle fluid See 9.9
Yearly or 500 Hours
• Replace secondary air filter element
1
• Replace spark plugs
1
• Replace hydraulic fluid
See 9.4
600 Hours
• Check and adjust valve lash (Kohler Engines)
3
Grease Fittings
1. Caster Pivot (2) 2. Deck Spindle (3) 3. Deck Lift Pivot (4)
To Next Page
Loading...
Need help?
General
