10
1. Insertthexedpanel(C)intothemetaltrack(B).Donotfullytightenitasfurtheradjustmentsmayberequired.
Note: The wall track (B) allows you to adjust the position of the xed glass panel (C). Adjusting the depth and/
or giving the xed glass panel a slight angle allows for precise alignment with the door.
2. Smoothlyslidetheguide(N)atthebottomofthexedglasspanel(C)withoutsecuring.
3-4. Insert the roller guide track (O) into the guide (N). Place the roller guide track’s anchor (P) onto the track (O).
5-6. Mark the positions of holes of the sliding door guide (N) and the roller guide track’s anchor (P).
FIXED PANEL INSTALLATION
B
C
1
C
N
2
O
N
P
O
C
P
4
6
3
5
N