Jacuzzi J-400 Series

Page 50
J-400 Series
11.0 Operating Instructions
11.1 J-1000™ Control Panel
Your Jacuzzi spa is equipped with a J-1000™ control panel, massage
selectors, and air control knobs located on the top rim of the spa (pages
22-33). These controls let you operate many of the special functions of
your Jacuzzi spa. When you press button B from the Main Menu, you will
enter the Jets pump submenu (Figure A).
D
C
B
A
JETS
Jet 1
Jet 2
OFF
OFF
= Jets Pump 1 icon
= Jets Pump 2 icon
  utton A: Turns Jets pump 1 on and off.
   Turns Jets pump 2 on and off.
   Press this button to return to the Main Menu.
11.2 Activate Jets Pump
From the Main Menu (page 35), press button B to enter the Jets Pump
Submenu. The LCD screen will display the Jets Pump Submenu
(Figure A). From this menu you can control both pumps in the following
sequence:
1. Press button A to activate pump #1.
2. Press again to turn pump #1 off.
3. Press button C to activate pump #2.
4. Press again to turn pump #2 off.
The pumps will move from an “OFF” state into an ON (
) state.
Auto Turn Off —Anytimeapumphasbeenmanuallyturnedon,itwill
automaticallyturnoffafterapproximately20minutes.Ifatthistimeyou
desiremorejetoperationyoumaysimplyturnthepump(s)backon.
Figure A
A
C
D
JETS ICON
WHEN OFF
JETS ICON
WHEN ON