EasyManuals Logo

Jacuzzi J-HN250C User Manual

Jacuzzi J-HN250C
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
- 2 -
INST 396 Jacuzzi® J-HN Series Heater V12-16
NOTICE TO INSTALLERS/ CODE REQUIREMENTS
This appliance must be installed in accordance with all local codes and/or the latest edition of the National Fuel Gas Code, ANSI
Z223.1/NFPA 54 and the latest edition of the National Electrical Code, NFPA 70 for the USA installations.
Installations in Canada must be done in accordance with the latest edition of CAN/CGA-B149.1 or .2 and the latest edition of CSA
C22.1 the Canadian Electric Code, part 1.
This Pool Heater, when installed in the USA, must be electrically grounded and bonded in accordance with all local codes, or in the
absence of local codes, with the National Electrical Code (NEC), NFPA 70,or in Canada, installation must be in accordance with the
CSA C22.1, the Canadian Electric Code , part 1
High voltage is present in some heater circuits making it mandatory that any electrical maintenance and repairs be attempted
only by properly qualified personnel.
CAUTION; Label all wires prior to disconnection when servicing controls, Wiring errors can cause improper and dangerous
operation. Verify proper operation after servicing
CARBON MONOXIDE GAS IS DEADLY: Exhaust gases from this pool heater may contain toxic levels of
Carbon Monoxide , a dangerous and poisonous gas that you cannot see or smell
SAVE THESE INSTRUCTIONS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jacuzzi J-HN250C and is the answer not in the manual?

Jacuzzi J-HN250C Specifications

General IconGeneral
BrandJacuzzi
ModelJ-HN250C
CategoryHeater
LanguageEnglish

Related product manuals