Need help?Do you have a question about the Jadak HS-1RS and is the answer not in the manual?
Safety warning regarding Class 2 laser aiming system.
Information on identifying the scanner via labels.
Guidance on optimal aiming and scanning methods for barcodes.
Step-by-step instructions for USB connection.
Settings to configure USB interface modes (COM Emulation, HID Keyboard).
Setting the keyboard layout for HID Emulation.
Adjusting data output speed in HID Keyboard mode.
Options for reverting to custom or factory default settings.
Configuration of beeper volume for good reads.
Enabling or disabling the vibration function.
Setting the scanner's trigger operation modes.
Setting the maximum time for trigger activation.
Enabling reading of multiple symbols per trigger.
Introduction to scanner utilities.
How to get a list of programming commands.
Information about software revision.
Building user-defined data into message strings.
User-definable characters before scanned data.
User-definable characters after scanned data.
Overview of RFID capabilities and supported frequencies.
Enable or disable RFID scanning functionality.
Set RFID read start/stop block numbers.
Set timeout period for RFID read/write operations.
Read hex data from specific RFID blocks.
Write data to specific RFID blocks.
User-definable characters before RFID data.
User-definable characters after RFID data.
Control the beeper tones for notifications.
Control the scanner's LED indicators for notifications.
Control the vibration engine for notifications.
Overview of imaging capabilities and limitations.
Adjusting the brightness of the illumination LEDs.
Automatically control gain and exposure settings.
Set the target white value for image processing.
Define a limited area for barcode scanning.
Set the top and bottom boundaries for the decode window.
Set the left and right boundaries for the decode window.
Enable or disable all supported symbologies.
Configuration for Codabar barcode settings.
Configuration for Code 11 barcode settings.
Configuration for Code 128 barcode settings.
Configuration for Code 39 barcode settings.
Configuration for UPC-A barcode settings.
Configuration for PDF417 barcode settings.
Configuration for Data Matrix barcode settings.
RFID performance and supported transponders.
Specifications for barcode scanning features.
Details on interface, OS compatibility, and indicators.
Operating temperature, humidity, and sealing.
How to clean the scanner window for optimal performance.
How to clean the scanner housing safely.
Step-by-step guide to replace the interface cable.
Procedures for getting support and service.
Details of the product's limited warranty terms and conditions.
FCC/IC compliance information and statements.
RF exposure compliance for FCC and IC.
Format for sending commands to the HS-1RS.
Comprehensive list of commands and their default parameters.
Table of AIM IDs and modifiers for barcode symbologies.
Visual examples of various barcode symbologies.
Chart mapping Hex values to ASCII characters.
General| Brand | Jadak |
|---|---|
| Model | HS-1RS |
| Category | Barcode Reader |
| Language | English |
To Next Page
