Need help?Do you have a question about the Jadak HS-1RL and is the answer not in the manual?
Explains how to identify the HS-1RL scanner using its label information.
Describes methods for aiming and scanning barcodes and 2D matrix symbols effectively.
Provides steps for connecting the HS-1RL scanner to a computer via USB.
Explores available interface modes like COM Port and HID Keyboard emulation.
Details how to set the keyboard layout for USB HID Keyboard emulation.
Explains how to adjust the data transmission speed in USB HID Keyboard mode.
Configures feedback (beeps, vibration), trigger modes, delays, and read behavior.
Commands to check software revision, revision time, and device serial number.
Explains message strings and user-defined data in scanning.
Options for transmitting AIM ID or Symbol ID characters.
Configures user-definable characters sent before scanned barcode data.
Configures user-definable characters sent after scanned barcode data.
Introduces LF RFID reading capabilities at 125 kHz.
Lists supported LF RFID tag types for the HS-1RL.
Explains that the HS-1RL cannot capture images but aids barcode finding.
Controls the intensity of the illumination LEDs for scanning.
Defines a limited area for improved barcode decoding performance.
Option to enable or disable all supported symbologies simultaneously.
Configuration for linear barcodes like Codabar, Code 11, Code 128, Code 39, Code 93.
Configuration for Data Matrix, QR Code, Aztec, Maxi Code, and PDF417 symbologies.
Procedures for cleaning the scanning window and housing to ensure performance.
Instructions for inspecting, replacing, and caring for the HS-1RL interface cable.
Contact details and procedures for obtaining technical assistance or factory service.
Explains command syntax, parameters, specifiers, and how to query device settings.
Detailed lists of commands, their ranges, default values, and descriptions.
Maps barcode types to AIM IDs and shows visual examples of symbologies.
Provides charts for converting Hex values to ASCII characters for data interpretation.
General| Brand | Jadak |
|---|---|
| Model | HS-1RL |
| Category | Barcode Reader |
| Language | English |
To Next Page
