HS-1RL User’s Manual Page 33
RFID Presentation Mode Switching
When you place the HS-1RL in a presentation cradle, it will automatically switch to Barcode
Presentation mode. By pressing the trigger button, you can toggle between Barcode and RFID
Presentation mode.
Beeper Sounds
The HS-1RL has the option to have its beeper controlled externally by a host.
This can be useful for certain notifications. Eight different beeper tones are available in the HS-
1RL. Use the command BEPSOND x (where ‘x’ is a value between 0 and 7), to have the HS-
1RL sound one of the 8 different beeper tones. *Beeper must be enabled.
Example codes:
LED Indicators
The HS-1RL also has the option to have its green and red LED controlled externally by a host.
This can be useful for certain notifications. Five different indicator variations are available in the
HS-1RL. Use the command LEDINDC x (where ‘x’ is a value between 0 and 5), to have the HS-
1RL light up one of its LED Indicators in various ways.
Example codes:
Vibration Indicator
The HS-1RL furthermore has the option to have its vibration engine controlled externally by a
host. This can be useful for certain notifications. Three different vibration variations are available
in the HS-1RL. Use the command VIBRATE x (where ‘x’ is a value between 0 and 2), to have
the HS-1RL vibrate in various ways.
Note: For this command to work, Vibration must be enabled (VIBENAB 1).
To Next Page
Loading...
