Jadak HS-1RL - MSI Check Digits

HS-1RL User’s Manual Page 53
a menu command barcode.
Default minimum length = 4. Default maximum length = 48.
MSI Minimum Length MSI Maximum Length
MSI Check Digits
With MSI symbols, one check digit is mandatory and always verified by the reader. The
second check digit is optional.
If the MSI codes include two check digits, scan the Two MSI Check Digits bar code to
enable verification of the second check digit.
Default = Enable One Check Digit, but don’t transmit.
Disable MSI Check Digits
* Enable One Check Digit, but don’t Transmit Enable One Check Digit and Transmit
Enable Two Check Digits, but don’t Transmit Enable Two Check Digits and Transmit