HS-1RL User’s Manual Page 11
1 - Introduction
JADAK’s HS-1RL is a hand-held barcode and Radio Frequency Identification (RFID) reader
that utilizes area imaging technology to read popular linear (1D), stacked linear, and matrix
(2D) barcodes, combined with reading Low Frequency (LF or 125 kHz) RFID tags in close
distance (10 to 40mm).
With a small ergonomic shape, the HS-1RL can be used in a wide variety of applications but is
specifically designed for healthcare applications and environments. The HS-1RL has a sealed
housing that protects it from day to day debris and spills and is built with medical grade plastics
that are compatible with popular medical cleansers and disinfectants.
This User’s Guide provides installation and programming instructions for the HS-1RL. Product
specifications, dimensions, warranty, and customer support information are also included.
JADAK’s barcode imagers are factory programmed for the most common terminal and
communications settings. If you need to change these settings, programming is accomplished
by scanning the bar codes in this guide or sending the relevant commands serially.
Note: An asterisk (*) next to an option indicates the default setting.
To Next Page
Loading...
