Jadak HS-1RL - 2 D Matrix Symbologies

HS-1RL User’s Manual Page 58
2D Matrix Symbologies
Aztec Code
Aztec Code Defaults
To set the default values for Aztec Code, scan this code:
Aztec Code On/Off
Scan one of the codes below to enable or disable Aztec Code.
Default = Enabled.
* Enable Disable
Data Matrix
Data Matrix Defaults
To set the default values for Data Matrix, scan this code:
Data Matrix On/Off
Scan one of the codes below to enable or disable Data Matrix. Default = Enabled.
* Enable Disable