Jadak HS-1RL - AIM IDs and Sample Barcodes

HS-1RL User’s Manual Page 75
Appendix B - AIM IDs
Barcode
AIM ID
AIM ID Modifiers
Code 39, Code 39 Full ASCII,
Code 32
A
0 No check character or Full ASCII processing.
1 Reader has checked one check character.
3 Reader has checked and stripped check character.
4 Reader has performed Full ASCII character conversion.
5 Reader has performed Full ASCII character conversion
and checked one check character.
7 Reader has performed Full ASCII character conversion
and checked and stripped check character.
Example: A Full ASCII bar code with check character W,
A+I+MI+DW, is transmitted as ]A7AIMID where 7 = (3+4).
Code 128, ISBT 128, ISBT 128
Concatenated, GS1-128, Coupon
(Code 128 portion)
C
0 Standard data packet, no Function code 1 in first symbol
position.
1 Function code 1 in first symbol character position.
2 Function code 1 in second symbol character position.
Example: A Code (EAN) 128 bar code with Function 1
character FNC1 in the first position, AIMID is transmitted as
]C1AIMID
Data Matrix
d
0 ECC 000-140, not supported.
1 ECC 200.
2 ECC 200, FNC1 in first or fifth position.
3 ECC 200, FNC1 in second or sixth position.
4 ECC 200, ECI protocol implemented.
5 ECC 200, FNC1 in first or fifth position, ECI protocol
implemented.
6 ECC 200, FNC1 in second or sixth position, ECI protocol
implemented.
UPC/EAN, Coupon (UPC portion)
E
0 Standard data packet in full EAN format, i.e. 13 digits for
UPC-A, UPC-E, and EAN-13 (not including supplemental
data).
1 Two digit supplemental data only.
2 Five digit supplemental data only.
3 Combined data packet comprising 13 digits from EAN-13,
UPC-A or UPC-E symbol and 2 or 5 digits from
supplemental symbol.
4 EAN-8 data packet.
Example: A UPC-A bar code 012345678905 is transmitted
as ]E00012345678905
Barcode
AIM ID
AIM ID Modifiers