JWI-3000 9
on
：
Check weighing function is auto-on when restart the indicator
off
：
Check weighing function would not auto-on when restart the indicator
9. Stable Check Weighing
On: Check weighing after stable indicator appears and the weights is between the upper and
lower limit
Off: Check weighing when the weights is between the upper and lower limit
10. Check Weighing buzzer beep
Hi
：
There will be a warning sound when the weight of articles exceeds the upper limit, and
the weight is equal or more than 20d
LO: There will be a warning sound when the weight of articles exceeds the lower limit, and
the weight is equal or more than 20d
OK
：
There will be a warning sound when the weight of articles is between the upper and
lower limit (including the upper and lower limits), and the weight is equal or more than 20d
OUT
：
There will be a warning sound when the weight of articles is beyond the upper & lower
limit, and the weight is equal or more than 20d
no.beep
：
no beep
11. External device
CX: MMS screen (V0.02 version)
CK
：
：：
：
thermal printer
（
paper size 57.5mm
）
= Birch printer
（
paper size 5cm*3cm
）
= Godex printer
（
paper size 5cm*3cm
）
= Zebra printer
（
paper size 5cm*3cm
）
= Dot matrix printer
=Large LED display
=Computer
12. RS-232 Serial Transmission Rate
9600
，
4800
，
2400
13. Print mode
contin
：
Continuous print
CAN DIEN TU TAN HIEP THANH
www.tanhiepthanh.com.vn
To Next Page
Loading...
Need help?
General
