JWI-3000 2
Power supply AC 100V/220V (AC±10%) or Rechargeable battery
（
6V/4A
）
Feature
Up to 1/15000 resolution
Attractive outline design with durable ABS housing
Backlit LED display with prominent 34mm high digits
Adjustable filtering level for weighing under various conditions
Zero / Tare / Weighing / Simple counting / Hold / Net & Gross Weight / Check weighing
function
Suitable for a wide range of bases and load cells
Adjustable capacities, resolutions and parameters(suitable resolution range 300---30000)
Adjustable stand for bench scale
3-2 Front Panel
3-2-1 LCD Display
Low battery indication
ZERO Center of Zero Indication. The zeroing range is ±2
﹪
of scale capacity.
Stable indication
TARE Symbol “ ” points at “TARE” when the weight of the container is tared .
Preset Tare Symbol “ ” points at “Preset Tare” when Tare value entered
via keypad.
NET
Net weight--Gross weight minus Tare. Symbol “ ” points at “NET” when Tare or Preset
Tare action are done.
UW Symbol “ ” points at “UW” when calculated unit weight is lower than 4/5 of scale division.
Unit weight is too small for ensuring accurate quantity calculations.
HOLD Symbol “ ” points at “HOLD” when the hold function is enabled.
CAN DIEN TU TAN HIEP THANH
www.tanhiepthanh.com.vn
To Next Page
Loading...
Need help?
General
