Jadever JWI-700D Series User Manual

JWI-700D/700S 12
to complete. “ ”appears at the left bottom.
6. Press M+/SAVE to save. After the window displays “ ”, it will return to normal weighing
mode.
7.Operation
7-1 Weighing
Begin with no load on the scale, the display reading zero. Place item(s) to be weighed on the
scale. The display shown is the gross weight.（The desired weighing unit should be selected
before weighing.） →
7-2 Tare
Manual Tare
When weighing a sample that must be held in a container, tare stores the container weight into
memory.
1. Under the weighing mode, place the container on the weighing pan, wait till stable symbol
appears, then press the key TARE. The container is tared.
→
2. Place the item(s) to be weighed into the container. The weight displayed is the net weight.
3. Remove all items from the weighing pan; the screen displays the tare value.
4. To clear tare with an empty pan, press down key TARE or key ZERO/ESC
Preset Tare
1. Long press key TARE for 3 seconds. The scale is now in digital inputting mode with the

Jadever JWI-700D Series Specifications

General

Brand	Jadever
Model	JWI-700D Series
Category	Accessories
Language	English