JWI-700D/700S 8
Method2: Press M-/SET to free-set the resolution. Press UNIT to choose the weighing unit
Press MR/ or TARE/ to shift key leftward or rightward. Press +/PRINT/HI or
-/HOLD/LO to change the value. When move to the right-most, press +/PRINT/HI or
-/HOLD/LO to move the decimal point. Press M+/SAVE to save and return.
4. When the window is showing “DIV”, press M-/SET to check the division. Press ZERO/ESC
to return.
5. When the window is showing “accura”, press M-/SET to enter resolution setting.
Method1: Press MR/ or TARE/ to choose the general used resolution. Press
M+/SAVE to save and return.
Method 2: Press M-/SET to free-set the resolution. Press MR/ or TARE/ to shift key
leftward or rightward. Press +/PRINT/HI or -/HOLD/LO to change the value. Press
M+/SAVE to save and return.
6. Press ZERO/ESC to return to normal weighing mode.
5-2 Function Setting
1. Press and hold M-/SET while powering on or long press M-/SET under normal weighing
mode to enter function setting. The window displays “check”. Setting item “P00” displays
momentarily at the left bottom
2. Press MR/ or TARE/ to shift between the functions
3. Press M-/SET to enter the function parameter setting.
4. Press MR/ or TARE/ to shift between the function parameters
5. Press M+/SAVE to save and return to higher option
6. Press ZERO/ESC to return to higher option without saving.
7. Press ZERO/ESC to return to normal weighing mode.
To Next Page
Loading...
Need help?
General
