Jadever JWI-700D Series User Manual

JWI-700D/700S 13
left-most digit blinking.
2. Press MR/ or TARE/ to move the key leftwards or rightwards; Press +/PRINT/HI or
-/HOLD/LO to change the value. E.g. here we set the Preset Tare value as
0.500kg
3. Press key M+/SET to save and return to weighing mode.
4. Put the load on the container, the scale will automatically deduct the value of the container
from the total value.
5. To clear tare with an empty pan, press down key TARE or key ZERO/ESC
7-3 Check Weighing
Lower limit setting
1. Begin by pressing down key -/HOLD/LO. It is now in digital inputting mode with the
left-most digit blinking.
2. To set the value of lower limit, press MR/ or TARE/ to move the key leftwards or
rightwards; Press +/PRINT/HI or -/HOLD/LO to change the value.
3. Press M-/SET to enable / disable the check weighing function
4. Press M+/SAVE to save the Lower limit and return to weighing mode
Upper limit setting
1. Begin by pressing down key +/PRINT/HI. It is now in digital inputting mode with the
left-most digit blinking.
2. To set the value of lower limit, press MR/ or TARE/ to move the key leftwards or

Jadever JWI-700D Series Specifications

General

Brand	Jadever
Model	JWI-700D Series
Category	Accessories
Language	English