About This Manual 1
Revision 2.0c – 30 August 2013 HPC User Manual
EMC COMPLIANCE
This product is approved for use in Europe and Australia/New Zealand and conforms to the following
standards:
European Norms Australian / New Zealand Standards
EN 55015 AS/NZS CISPR15
IEC 60439-1
IEC 60439.3
AS/NZS 3439.1
AS/NZS 3439.3
IEC 60950 AS/NZS 60950
To ensure continued compliance with EMC Directive 89/336 and the Australian Radiocommunications
Act 1992, use only high quality data cables with continuous shield, and connectors with conductive
backshells. Examples of such cables are:
DMX: Belden 8102 100% Aluminium foil screen, 65% Copper braid.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or
modifications not expressly approved by the manufacturer could void the user's authority to operate
the equipment.
DISCLAIMER
Information contained in this manual is subject to change without notice and does not represent a
commitment on the part of the vendor. JANDS PTY LTD shall not be liable for any loss or damage
whatsoever arising from the use of information or any error contained in this manual.
It is recommended that all service and repairs on this product be carried out by JANDS PTY LTD or its
authorised service agents.
JANDS PTY LTD cannot accept any liability whatsoever for any loss or damage caused by service,
maintenance or repair by unauthorised personnel, or by use other than that intended by the
manufacturer.
JANDS HPC Series products must only be used for the purpose they were intended by the
manufacturer and in conjunction with this operating manual.
Disconnect mains power when not in use.
Designed in Australia
JANDS PTY LTD ACN 001 187 837
40 Kent Rd Locked Bag 15
Mascot NSW 2020 MASCOT NSW 1460
Sydney Australia Sydney Australia
Phone: +61-2-9582-0909 Email: info@jands.com.au
Fax: +61-2-9582-0999 Web:
www.jands.com.au
JANDS PTY LTD 2013 Revision 2.0c
All rights reserved 30 August 2013