Jands Stage - Design Features

2
- Channel Flash buttons to add or solo channel outputs regardless of the
current setting of the channel level fader.
- Add/Solo Master fader controlling the overall level of flash buttons.
- Add/Solo selector to determine the function of the flash buttons.
- Preset master faders providing control over each bank of Presets.
- Two independent Grab faders used to store scenes. These Grab faders
may also be considered as 3rd and 4th Presets.
- Master Flash buttons provided on Presets 1 and 2, Master faders, Chase
level master and Grab 1 and 2 faders.
- Chaser controls including Go/Cue, Speed, Direction and Level all of
which have the ability to chase through all or selected
channels in ascending or descending order.
- Audio trigger enabling the chase sequence to follow audio signal
- 60 mm Presets arranged in 2 Preset format providing individual control
over channel levels.
- Wide Mode operation doubles the number of available control channels
which enables the Stage 12 console to operate as a single preset 24
Channel Console (48 single presets in the case of the Stage 24).
- DMX-512 output conforming with USITT DMX-512 (1990) Protocol
(AXR Output connector 5 pin Alcatel/Cannon).
- Stage 12/24 consoles may be used as slave consoles for the Jands
Event and ESP II consoles.
- Power input 12 V DC by means of a supplied plug-pak (Connector:
2.5mm co-axial).
Design Features