3
Getting Started
Connecting Power
Plug the socket end of the plugpack output into the power receptacle
located on the rear face of the Stage 12/24 console. The plugpack
should be plugged into a mains outlet, and then the outlet switched on.
Please note that when power is removed from the console, all settings
are lost.
Connecting the Output of a Console to a Dimmer Rack
The DMX-512 control protocol output is standard on all Stage 12/24
consoles. Connect from the console's DMX output to the DMX input on
the dimmer rack, then check the dimmer instruction manual for details
on selecting DMX channels and looping the DMX line to other dimmer
racks.
Connecting the Audio Trigger Input
The Audio Trigger input is used to step the chase. Use a stereo plug
with balanced signals or a mono plug with unbalanced signals.
Input connector: 6.5mm jack; line level; 100 Hz trigger frequency
To Next Page
Loading...
Need help?
General
