J&W X48 Series - Page 20

- 19 -
Intel X48 Series User's Manual
BIOS SETUP UTILITY
Main
System Overview
←
Select Screen
↑↓
Select Item
F1 General Help
F10 Save and Exit
ESC Exit
AMIBIOS
Version :08.00.15
Build Date:03/29/08
ID :X480A005
Processor
Intel(R) Core(TM)2 Duo CPU E7300 @ 2.66GHz
Speed :1607MHz
Count :2
System Memory
Size :512MB
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
•Press the ken of "ESC" to return "Main" menu.
• System time
This item sets the time you specify(usually the current time)in the format of
[Hour],[Minute]and [Second].
• System date
This item sets the date you specify(usually the current date0in the format of
[Month],[Date],and [Year].
• Floppy A
Allows you to selects the type of oppy disk drive installed in your system. If you do
not install a floppy disk drive, set this item to None. Options are: None, 360K/5.25",
1.2M/5.25", 720K/3.5",1.44M/3.5", 2.88M/3.5".
• Language
Allows you to selects the current default language used by the BIOS.
►
SATA Port 1 /2/3/4/5/6; IDE Master /Slave (SATA / IDE device)
This item sets the status of auto detection of SATA/IDE devices while enterting setup,
and BIOS will auto detects the presence of SATA/IDE devices. Press "Enter" Key to enter
the submenu.
BIOS SETUP UTILITY
Main
SATA 1 Select the type
of device connected
to the system.
←
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Device :Hard Disk
Vendor :ST380215AS
Size :80.0GB
LBA Mode :Supported
Block Mode:16Sectors
PIO Mode :4
Async DMA :MultiWord DMA-2
Ultra DMA :Ultra DMA-6
S.M.A.R.T.:Supported
Type
LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T
32Bit Data Transfer
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.