J&W X48 Series User Manual

- 26 -
Intel X48 Series User's Manual
4.5.4 Boot Setting
►
Boot Settings Conguration
Click <Press Enter> key to enter its submenu, it will be display boot setting
conguration,and the all functions allow BIOS to skip certain tests while booting, whether
displays normal POST messages or OEM Logo instead of POST messages through sets the
Quit Boot.
BIOS SETUP UTILITY
Main Advanced
Boot
Security
Power
JUSTw00t!
Exit
Boot Settings Configure Settings
during System Boot.
←
Select Screen
↑↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
►
Boot Settings Configuration
►
Boot Device Priority
►
Removable Drives
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
・
DMA Channel 0/1/3/5/6/7
Optional: Available, Reserved
Available: Specied DMA is available to be used by PCI/PnP devices.
Reserved: Specied DMA is reserved for use by Legacy ISA devices.
・
Reserved Memory Size
Optional: Disabled, 16K, 32K, 64K
Allows you to select size of memory block to reserve for legacy ISA devices.
BIOS SETUP UTILITY
Boot
Boot Settings Configuration Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
←
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Quick Boot
Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
Wait For 'F1' If Error
Hit 'Del' Message Display
Interrupt 19 Capture
[Enabled]
[Disabled]
[Force BIOS]
[On]
[Enabled]
[Enabled]
[Disabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.

J&W X48 Series Specifications

General

Brand	J&W
Model	X48 Series
Category	Motherboard
Language	English