To Next Page

To Previous Page

- 25 -

Intel X48 Series User's Manual

►

PCIPnP

・

Clear NVRAM

This item for clearing NVRAM during system boot.

Optional:Yes,No

・

Plug & Play O/S

This item lets the BIOS congure all the devices in the system or lets the operating

system congure plug and play (PnP) devices not required for boot if your system has

a Plug and Play operating system.

Optional:Yes,No

・

PCI Latency Timer

This item sets value in units of PCI clocks for PCI device latency timer register.

Optional:32,64,96,128,160,192,224,248

・

IRQ3/4/5/7/9/10/11/14/15

Allows to you assigns IRQ 3,4,5,7,9,10,11,12,14,15 to the rst PCI slot.

Option: IDE, RAID, AHCI

IDE: Disables RAID for the SATA controller and congures the SATA controller to

PATA mode. (Default)

AHCI: Congures the SATA controller to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specication that allows the storage driver to enable advanced

Serial ATA features such as Native Command Queuing and hot plug.

RAID/IDE: Enables RAID for the SATA controller. (The IDE controller still operates in PATA

mode.

BIOS SETUP UTILITY

Advanced

Advanced PCI/PnP Settings Clear NVRAM during

System Boot.

←

Select Screen

↑↓

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Clear NVRAM

Plug & Play O/S

PCI Latency Timer

IRQ3

IRQ4

IRQ5

IRQ7

IRQ9

IRQ10

IRQ11

IRQ14

IRQ15

DMA Channel 0

DMA Channel 1

DMA Channel 3

DMA Channel 5

DMA Channel 6

DMA Channel 7

Reserved Memory Size

[No]

[64]

[Available]

[Disabled]

Brand	J&W
Model	X48 Series
Category	Motherboard
Language	English

J&W X48 Series User Manual

Table of Contents

Questions and Answers:

J&W X48 Series Specifications

Related product manuals