Jandy AquaPure Ei Series User Manual

Page 3
Table of Contents
Section 1. Important Safety Instructions ...... 5
Section 2. System Description ...................... 8
2.1 Product Specifi cations ...................................... 8
2.2 Product Contents .............................................. 9
Section 3. Installation Instructions ............... 10
3.1 Materials and Tools ........................................... 10
3.2 Installation Requirements ................................. 10
3.3 Install the Power Pack, Cell, and Pod ............... 11
3.4 Bypass Plumbing Instructions:
If Flow Rate Exceeds 92 GPM (348 LPM) ........ 13
3.5 Alternative Installation
(When Pipe is Obstructed) ................................ 14
3.6 Connection to an AquaLink
®
RS Control
System or PDA (Optional) ................................. 14
3.6.1 Verify the Controller Type on the Power
Pack is Set Correctly .................................14
3.6.2 Wiring to the AquaLink RS Control
System or PDA ...........................................15
3.6.3 Testing the Connection ..............................16
Section 4. Pool Water Preparation ................ 17
4.1 Determining Pool Size
(Gallons of Water in Your Pool) ......................... 17
4.2 Determining Pool Size
(Litres of Water in Your Pool) ............................ 17
4.3 Chemistry You Need to Know ........................... 17
4.4 Optimum Pool Water Conditions ..................... 18
4.5 Chlorine Testing ................................................ 18
4.6 Salt (NaCl Sodium Chloride) ........................... 18
4.6.1 When to Add Salt .......................................18
4.6.2 What Type of Salt to Use ...........................19
4.6.3 How Much Salt to Use .................................... 19
4.6.4 How to Add Salt to the Pool ......................20
Section 5. Operating Instructions ................. 22
5.1 Control Panel .................................................... 22
5.2 Turning Power Pack On/Off (Manually) ............ 22
5.3 Setting the Chlorine Output Level ..................... 22
5.4 Connection to an AquaLink RS / PDA
Control System ................................................. 23
5.5 Polarity Reversal ............................................... 23
5.6 Backup Battery ................................................. 23
Section 6. Maintenance Instructions ............ 24
6.1 Daily .................................................................. 24
6.2 Monthly ............................................................. 24
6.3 Cleaning the Cell .............................................. 25
6.4 Winterizing ........................................................ 26
6.4.1 Winterizing Procedure ................................26
Section 7. Troubleshooting ........................... 27
7.1 Problems and Corrective Action ....................... 27
Section 8. Replacement Parts and
Exploded Views ............................ 30
8.1 Parts List ........................................................... 30
8.2 Exploded Views ................................................ 31

Jandy AquaPure Ei Series Specifications

General

Brand	Jandy
Model	AquaPure Ei Series
Category	Lighting Equipment
Language	English