34
E. INSTALLING THE SEAT IN THE CAR
Before installing the safety seat, make sure that the ve-
hicle seat where you are going to install it is i-Size, or that
it is tted with ISOx anchors and that your vehicle is on
the list of compatible vehicles.
(See your vehicle instruction manual, it will tell you which
of the vehicle seats are compatible with the safety seat.)
Impact absorbing material over the entire surface in
contact with the baby.
Adjustable headrest with 5 different positions.
The safety seat can be reclined.
Fitted with a cushion insert for babies of up to 6 months.
Convenience for parents:
The height of the shoulder straps can be adjusted without
having to take the straps off. This action is connected to
the headrest so it protects the baby better in the event of
a side impact while supporting the head.
The seat can be turned to face the door making it easier
to place the baby in it.
Removable and washable upholstery.
Main use options:
1 - Rear facing
For children of 40 to 105 cm tall and with a maximum
weight of 18 kg.
Install the seat with ISOx anchors and the anti-rotation
leg.
The child is secured with the 5-point harness tted in
the seat.
2 - Forward facing
For children of 76 to 105 cm tall and with a maximum
weight of 18 kg.
Do not use in the forward facing position is the child is
less than 15 months old.
Install the seat with ISOx anchors and the anti-rota-
tion leg.
The child is secured with the 5-point harness tted in
the seat.
The GRAVITY safety seat should preferably be installed
on the rear seat of the vehicle. Before installing the
safety seat, make sure that the vehicle seat where you
are going to install it is i-Size, or that it is tted with ISOx
anchors and that your vehicle is on the list of compa-
tible vehicles.
To Next Page
Loading...
