JANE Gravity - Adjusting Seat Orientation; ISOfix Anchor Engagement and Leg Extension

35
EN
Rear facing
Forward facing
Extract the ISOx anchors (6) by turning the handle (9) on
the side of the base. The anti-rotation leg (12) will unfold
due to gravity.
1
.a
Guide both anchors towards the connectors and press un-
til both sides are locked, two green signals on the base (8)
will show that both sides are correctly anchored. If one or
both of the signals are red, repeat this step.
1
.b
Turn the handle (9) anti-clockwise to t the safety seat
rmly against the backrest of the vehicle seat.
1
.c
Pull the leg lock (12b) and extend it until it makes contact
with the oor of the vehicle. The signals on the foot of
the leg (12a) will turn green.
1
.d
Release the leg lock and extend the leg manually until it
locks again. The lock signal will turn green.
1
.e
F. CHANGING THE POSITION OF
THE SEAT
The GRAVITY safety seat can be used in the rear facing
position from birth up to when the child is 105 cm tall or
in the forward facing position from 15 months up to when
the child is 105 cm tall.
IM 1894.02_GRAVITY.indd 35 20/10/16 10:03