!
height. They should be just above the child’s shoulders.
GRAVITY has 5 shoulder strap positions, when adjusting
the height the headrest will move.
To change the height follow the steps below:
Pull the ring found on the back of the headrest (4), this
will unlock the position of the headrest.
4
.a
Slide the headrest (3) to the correct position for the child
and release the ring. Move the headrest until you hear
it click when locked into place. Pull the headrest to make
sure it is secure.
4
.b
WARNING: Adjust the height as the child grows.
I. RECLINING THE SEAT
The GRAVITY safety seat can be reclined using a lever on
the front part of the seat (10). It has 4 positions.
To recline the seat, pull the lever and slide the seat to the
required position.
5
J. REMOVING THE SEAT FROM THE
VEHICLE
Loosen the tension of the ISOx anchors by turning the
handle (9).
6
.a
Release the ISOx anchors by pressing both unlocking
buttons (7). The signals on the side (8) will turn red.
6
.b
Remove the safety seat. You can store the ISOx anchors
inside the base by turning the handle (9) and fold the leg.
K. RECOMMENDATIONS
Keep this instruction manual for future reference. Always
store it in the compartment underneath the seat (13).
Inside the vehicle make sure that all luggage and any
other objects that could cause damage in the event of
an accident are properly secured or stored.
To Next Page
Loading...
