janitza Prophi 6R - User Manual

Doc. no. 2.020.016.1.a 6.0.E - 11/2019
Janitza electronics GmbH
Vor dem Polstück 6
D-35633 Lahnau
Telefonischer Support: +49 6441 9642-22
E-Mail: info@janitza.com
www.janitza.com
www.janitza.com
Power Factor Controller
Prophi
®
6R
Manual
Version 6.0 E - 11/2019
Power Factor Controller
Prophi 6R
Manual
1 2 3 4 5 6
Power Factor Controller
Blindleistungsregler
Auto
Program
Manual
Service
Enter
OK
Prophi
®
®

janitza Prophi 6R Specifications

General

Mounting	DIN Rail
Weight	Approx. 300 g
Protection Class	IP20
Interfaces	Ethernet
Protocols	Modbus TCP, Modbus RTU
Frequency Range	45-65 Hz
Operating Temperature	-10°C to +55°C
Humidity	≤ 95% (non-condensing)
Communication Interface	Ethernet
Protocol	Modbus TCP, Modbus RTU

Summary

Section 1 General

Section 2 Installation and Connection of the Controller

2.1 Current Measurement

Specifics on installing current converters for accurate measurement.

2.2 Programming of Phase-Correction

Configuration for phase alignment between voltage and current.

2.3 Alarm Output; Error Messages

Understanding controller alerts and fault indicators.

Section 3 Operating Modes

Section 4 Automatic Operation - Display of Grid Parameters

Section 5 Programming

5.1 Automatic Initialization

Process for automatic initialization and parameter recognition.

5.2 Manual Programming (Program Menu)

Detailed steps for manual configuration of all parameters.

5.3 Programming Lock

Security feature to prevent unauthorized parameter changes.

Section 6 Manual Operation (Initial Operation, Maintenance, Service) Programming of Fixed Stages

Section 7 Service Menu

Section 8 Expert Mode 1 and 2

8.1. Expert Mode 1

Configuration options within the first expert mode level.

8.2. Expert Mode 2

Configuration options within the second expert mode level, including message control.

Section 9 Control Principle

Section 10 Interface

Section 11 Initial Operation

Section 12 Maintenance and Warranty

Section 13 Troubleshooting

Section 14 Technical Data

Annex 1: Table of Control Series

Annex 2: Default Settings