Need help?Do you have a question about the Janome 2160DC and is the answer not in the manual?
General| Type | Computerized |
|---|---|
| Stitch Options | 60 |
| Buttonhole Styles | 6 |
| Maximum Stitch Width | 7 mm |
| Maximum Stitch Length | 5 mm |
| Needle Threading System | Automatic |
| LCD Display | Yes |
| Foot Control | Yes |
| Free Arm | Yes |
| Sewing Speed | 860 stitches per minute |
| Bobbin Type | Top Loading |
| Presser Feet | 7 |
Procedure for removing and attaching the face cover.
Steps to remove and attach the free-arm cover.
Procedure for removing and attaching the front cover.
Steps for removing and attaching the rear cover.
Adjusting the distance between presser foot and needle plate.
Setting the needle's position relative to the needle plate hole.
Aligning the rotary hook with the needle for correct stitches.
Adjusting the highest position of the feed dog.
Adjusting the upper thread tension.
Connecting components to Circuit Board-A.
Procedure for removing and installing Circuit Board-A.
Instructions for removing and installing the driving motor.
Procedure for replacing the switching regulator unit.
Steps to activate the self-diagnostic test mode.
Checks the functionality of all buttons on the machine.
Tests the main DC motor for correct operation.
Interpreting the results of the self-diagnostic test.
Guide for adjusting the buttonhole lever guide position.
Procedure to adjust the buttonhole sensor position.
Visual representation of parts with key numbers.
Detailed list of parts with key numbers and descriptions.
To Next Page
