Janome 2212 User Manual (English)

Questions and Answers:

M
Michael VillaAug 13, 2025
Why does the needle thread or bobbin thread keep breaking on my Janome 2212?
- D
  douglasnolanAug 13, 2025
  If the needle thread or bobbin thread is breaking on your Janome Sewing Machine, it could be due to several reasons. For the needle thread, check if it's threaded correctly, the tension might be too tight, the needle could be bent or blunt, or incorrectly inserted. Also, ensure the fabric is being drawn back after sewing and that the thread isn't too heavy or fine for the needle. Clean the bobbin case in all of these instances. For the bobbin thread, make sure it's threaded properly in the bobbin case, lint hasn't collected there, or the bobbin isn't damaged. If any of these are the cause, exchange the bobbin.
W
wsullivanAug 16, 2025
What causes skipped stitches on my Janome Sewing Machine?
- A
  Andrea JacksonAug 16, 2025
  Skipped stitches on your Janome Sewing Machine can occur if the needle is incorrectly inserted, bent, or blunt. The needle and/or threads might not be suitable for the fabric, or a BLUE TIPPED needle isn't being used for stretch, fine fabrics, and synthetics. Another reason may be that the needle thread isn't threaded properly.
G
garciapatrickAug 21, 2025
What to do if my Janome 2212 does not work?
- D
  Dennis WilsonAug 21, 2025
  If your Janome Sewing Machine isn't working, check if it's properly plugged in. Also, thread might be caught in the hook race, or the handwheel may have been disengaged for bobbin winding.
R
Ricardo HuangAug 25, 2025
What to do if the needle keeps breaking on my Janome Sewing Machine?
- C
  Courtney LeeAug 26, 2025
  If the needle is breaking on your Janome Sewing Machine, it might be due to incorrect insertion, or the needle could be bent or blunt. A loose needle clamp screw, excessive needle thread tension, failure to draw fabric back after sewing, using too fine a needle for the fabric, or turning the pattern selector dial while the needle is in the material could also be causes.
G
George RiosAug 28, 2025
Why is my Janome 2212 Sewing Machine causing seam puckering?
- C
  Christopher McgrathAug 28, 2025
  If you're experiencing seam puckering with your Janome Sewing Machine, it could be because the needle thread tension is too tight, the machine isn't threaded correctly, the needle is too heavy for the fabric, or the stitches are too coarse for the fabric. To address this, make the stitches denser.
T
Tony GonzalesSep 1, 2025
Why Janome 2212 Sewing Machine does not run smoothly and is noisy?
- J
  Julia ThompsonSep 1, 2025
  If your Janome Sewing Machine does not run smoothly and is noisy, it may be because threads have been caught in the hook mechanism, or the feed dog is packed with lint.
T
Tonya FernandezSep 4, 2025
How to fix cloth not feeding smoothly on Janome 2212?
- A
  Aaron NelsonSep 4, 2025
  If the cloth isn't feeding smoothly through your Janome Sewing Machine, it could be due to the feed dog being packed with lint, or the stitches being too fine. To resolve this, make the stitches coarser.
Y
yvonnemurraySep 8, 2025
Why stitches form loops below the work with my Janome 2212 Sewing Machine?
- R
  Rose RobertsSep 8, 2025
  If your Janome Sewing Machine stitches are forming loops below the work, it could be because the needle thread tension is too loose, or the needle is either too heavy or too fine for the thread.

Janome 2212 Specifications

General

Stitch Count	12
Buttonhole Style	4-step
Maximum Stitch Width	5mm
Maximum Stitch Length	4mm
Free Arm	Yes
Drop Feed	Yes
Weight	13 lbs
Type	Mechanical
Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Reverse Stitch	Yes
Presser Foot Pressure	Adjustable
Built-in Needle Threader	No
Speed	860 stitches per minute